Bucket elevators,also called a grain leg, Ideal solution for vertical transport of dry bulk material. TDTG mobile hopper bucket elevtor is hot product, which is a fixed mechanism for hauling materials.
TDG series bucket elevator is made up of a series of hopper fixed by uniform traction in unprovoked, materials be conveyed in vertical state. There are two forms the chain elevator and belt elevator. Bucket elevator with throughput, and enhance the high degree of high, stable and reliable operation, long life and other significant advantages, the equipment is suitable for conveying powder, granular and non-small-block mill and grinding of small materials, such as: coal, cement, stones, sand, clay, ore and so on. Our company can design and manufacture special models based on your needs.
The bucket elevator is ideal for the vertical transport of products such as grain, is a mechanism for hauling flowable bulk materials vertically.
Principle of TDTG mobile hopper bucket elevtor:
While powered on, the driving device (made by customer's requests) drives head pulley to make the bucket belt do the circular motion from bottom to up.TDG bucket elevator is filled with material and conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the parabolic design. After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted from bottom to the top to the specified height to reach conveying vertically.
Features of TDTG mobile hopper bucket elevator
1. Reasonable bucket design with large capacity;
2. Large lifting capacity, advance lifting height;
3. Installed an automatic tension device;
4. High strength ring chain and wearable;
5. Adopt steel belt with good toughness and high strength.
6. Fully closed, no dust flying that will help to improve working conditions.
7. Efficiently avoid the accumulation of products and minimize the breakage of grain. The bucket elevator
can operate continually under full load condition and can start smoothly under bucket full.
8. A wide range of elevated, not only handle the general powder, and elevate the mill cut larger materials .
9. Long service life, it seldom occurs extrusion and collision phenomenon.
10. Easy operation and maintenance, less vulnerable pieces.
11.the bucket elevator have five types. Pulley, wandering, the head parabola design is reasonable, the material is not easy to damage the nose,
according to the process requirement, can make high, middle and low speed elevator
Application of Bucket Elevator:
TDG series bucket elevator is used for lifting dry, bulk, fluidity powder, granular and block material, whereas ZH type hopper is often used for lifting slight moist, easy caking, bad fluidity powder material.
It uses the bucket to contain powders, particles or small bulk materials, and then elevates the bucket in a vertical and continuous way.
This machine is commonly seen in different-sized feed manufacturing plants, flour processing mills, starch factories and cereal storage stations.
Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper.
Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat.
TDTG mobile hopper bucket elevtor parts
Bucket elevator is composed of machine head, main frame, maintenance cylinder, ventilators, dustpan, dustpan belt and machine base. The materials are fed into the machine from the bottom and discharged from the top.
1. Firstly, the materials are evenly fed into the dustpan on the machine base;
2. Secondly, the materials are elevated into the machine head;
3. Thirdly, the raw materials are dumped into the targeted machine.
TDTG mobile hopper bucket elevtor technic parameters